Inkqubo echanekileyo yaseChina kwiSiteshi se-Steel-C esinemilenze edityanisiweyo Ukwenziwa kunye neFactory |Umnyama

Inkqubo echanekileyo kwi-Steel-C Channel enemilenze edibeneyo

Inkqubo echanekileyo kwi-Steel-C Channel enemilenze edityanisiweyo Umfanekiso obonakalayo

Inkcazelo emfutshane:

I-Concrete Inserts zisetyenziswa kwiindonga ezigalelwe ikhonkrithi, imigangatho, iisilingi, iziseko kunye neekholvethi ezifakwe ngaphambili.Ukufakwa kwekhonkrithi kunika isisombululo esipheleleyo sobunjineli, ukudibanisa ishaneli yentsimbi kunye neengxenye, ukwenza isakhelo sekhonkrithi esifakwe kwindawo.Esi sikhokelo sinika amandla aphezulu kunye nokuqina kwinkqubo yakho.

Thumela i-imeyile kuthi Whatsapp

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ingcaciso yeMveliso:

Uthotho lweUnistrut lweP3200Faka ikhonkrithiifanelekile kwizakhiwo ze-ankile kunye nezixhaso kwikhonkrithi.Le mveliso ivumela ukufakwa lula ngaphambi kokuba ikhonkrithi igalelwe, kunye nokunamathisela naphi na ubude bayo usebenzisa i-1-5 / 8 "Iifakelo, i-Channel Nuts okanye ezinye iimveliso. Ifanelekile kwizicelo ezinokufuneka ziphinde ziqwalaselwe okanye zifakwe kwakhona.

Inkcazo yeMveliso:

OkuConcrete Faka imijelo Strutingasetyenziselwa i-anchore kwiisilingi, imigangatho okanye iindonga.Ukuba yi-pre-pour installer, ifanelekile kwizicelo ezineenkxalabo zekhonkrithi eziqhekekileyo kwaye zigweme ukudalwa kweSilica Dust ngexesha lofakelo.Ikwaphunyezwe i-OPA kwizicelo ze-seismic bracing.

Imilinganiselo yomjelo yi-1 5/8" ububanzi x 1 3/8" ubunzulu x 12 ga.ngqindilili.Iithebhu zokufakela zibekwe kwi-8" OC kwaye zibe nobunzulu bokuzinzisa kwe-2-7 / 8".Imveliso inokubonelelwa nge-Back Plates, i-End Caps kunye ne-Closure Strip ukukhusela i-concrete seepage kwi-channel, ngokukhetha oku ngezantsi.
Uluhlu lwethu lwe-P3200 lufumaneka kwi-Pre-Galvanized (PG), i-Hot-Dip Galvanized (HG), i-Plain (PL).

Ukhetho:

"NC" Isimamva-Akukho Mcu wokuvala, kunye neeCaps zokuphela kunye neePlates zangasemva
Isimamva se-"WC"-Ne-Closure Strip, i-End Caps kunye ne-Back Plates
"X" Isimamva-Akukho Mcuku wokuValeka, akukho neeCaps zokuphela, ezineePlates zangasemva

P3270NC	20Ft.	PG	38.82
P3270NC	20Ft.	PL	38.82
P3270W	20Ft.	PG	34
P3270WC	20Ft.	PG	38.82
P3270WC	20Ft.	PL	38.82
P3270X	20Ft.	PG	38.6
P3270X	20Ft.	HG	40.9
P3270X	20Ft.	PL	38.6
P3270X	20Ft.	SS	38.6

Iinkcukacha:

Kubandakanya ukuvala kunye ne-end caps ngaphandle kokuba kucelwe ngenye indlela.
I-P3280 end cap isetyenziswe ngomgama ukuya kwi-ankile yokuqala ukuya kuthi ga kwi-2" (51 mm).
I-P3704 end cap isetyenziswa xa umgama wesiphelo ukuya kwiankile yokuqala ungaphezu kwe-2" (51 mm).
Izikhonkwane okanye i-anchor ifakela kwiifom nganye kwi-16 "(406.4 mm) ukuya kwi-24" (609.6 mm).
Ii-ankile zizi-8" (203.3 mm) embindini.